Beem 05958, Manual

Page: 26 / 72

EN 28
The fi rst indications that descaling is required are a large amount of steam being produced and
slower brewing of the coffee.
For descaling we recommend the BEEM premium descaler concentrate . The ef fi cient, food-safe and
environmentally friendly BEEM premium descaler concentrate is available from selected specialist
stockists, via our website
www.beem.de
or from our customer service department on request.
Descaling with the BEEM Premium Descaler Concentrate
1. Fill the water tank (
9
) up to the
MAX
marking (approx. 1250 ml) with a concentrate/water
solution of no more than 1:20 (one part concentrate to 20 parts water) (see the “Handling
and Operation” chapter – “Filling the Water Tank”).
2. Place the glass jug (
5
) or the thermal jug under the coffee outlet (
4
).
3. Press the
ON
/
OFF
button (
13
) to switch on the device. Allow the descaling solution to run
out through the coffee outlet.
4. To rinse the device, allow two tankfuls (approx. 1250 ml each) of clear water to run through
it and then clean the used coffee jug (see the “Cleaning and Care” chapter). The device is now
descaled and ready to be used again.
Storage
Disconnect the device from the mains power when it is not going to be used for a prolonged
period. Clean the device again if necessary (see the “Cleaning and Care” chapter) and let it dry
completely.
Store the device and all accessories in a dry, clean, frost-free place that is protected from direct
sunlight and cannot be accessed by children or animals.
Technical Data
Article number: 05958
Model number: CM-931T
Voltage supply: 220 – 240 V ~ 50 / 60 Hz
Power: 1000 W
Protection class: I
Capacity:
Glas jug: max. 1250 ml (approx. 10 cups)
Thermal jug: max. 1000 ml (approx. 8 cups)
ID of operating instructions: Z 05958 M DS V2 0319