Beem 05958, Manual

Page: 19 / 72

21 EN
•
In the interest of your own safety, inspect the device and the connec-
tion for damage each time before you use it. Use the device only if it
is in working order.
•
Do not make any modi fi cations to the device. Do not replace the
connection yourself. If the device or the connection of the device is
damaged, it must be replaced by the manufacturer, customer service
department or a specialist workshop in order to avoid any hazards.
•
It is essential to follow the instructions in the "Cleaning and Care”
chapter.
DANGER – Risk of Electric Shock
• Use the device only in closed rooms.
• Do not use the device in rooms with high humidity.
• Should the device fall into water, switch off the power supply immediately. Do not attempt to pull
it out of the water while it is still connected to the mains power!
• Never touch the device and the connection with wet hands when these components are
connected to the mains power.
• Make sure that the steam which emerges is not aimed directly at electrical devices and equip-
ment containing electrical components.
WARNING – Danger of Injury
•
Danger of suffocation!
Keep children and animals away from the packaging material.
Danger of scalding from heat, hot steam or condensation!
• Avoid coming into contact with the rising steam. Do not open the water tank lid during
the brewing process.
• Do not open the fi lter compartment during the brewing process. The fi lter compartment
and the permanent fi lter will become hot during use.
• Be careful when removing the permanent fi lter after operation. There may still be hot
water remaining in the permanent fi lter! Always allow everything to cool down fi rst before
something is removed / cleaned.
• Never pour water into the water tank when the device is switched on or during the
brewing process. Allow the device to cool down before
fi lling it again.
• Do not move the device during the brewing process.
• The coffee which is prepared is hot! Be careful when handling hot liquids.