Beem 05958, Manual

Page: 22 / 72

EN 24
Handling and Operation
PLEASE NOTE
• Do not pour milk or other liquids into the water tank. Only ever use water to make
coffee!
• Never over fi ll the permanent fi lter.
Display Lighting
The display lighting goes out 60 seconds after the last button has been pressed, unless the device
is in operation. Press any button to switch on the display lighting.
Time
As soon as the mains plug is plugged into a plug socket, the display lighting turns on and the time
display 12:00
fl ashes. The clock has a 24-hour time format.
1. Press the
PROG
button (
10
) once. SET TIME appears on the display.
2. Set the hours by pressing the
HR
button (
14
) and set the minutes by pressing the
MIN
but-
ton (
12
). If the respective button is pressed for an extended period, the fast increment mode
is activated.
The time is saved until a new time is set or the device has been disconnected from the
power supply.
Filling the Water Tank
1. Open the water tank lid (
1
).
2. Pour the quantity of water you want (min. 250 ml, max. 1250 ml) into the glass jug (
5
) or
thermal jug and then into the water tank ( 9 ). Keep an eye on the water level indicator ( 8 ) in
the water tank!
3. Close the water tank lid.
All the water in the water tank is always used.
Inserting the Permanent Filter
1. Open up the fi lter compartment (
3
) to the right.
2. Insert the permanent fi lter (
2
) into the fi lter compartment (
Picture A
).
3. Flip the fi lter compartment shut. You should feel and hear it click into place.