59
CONTENTS
INSTALLATION
INSTALLATION
Partial Enclosures (Australia Only)
This appliance shall only be used in an above ground, open
air situation with natural ventilation, without stagnant areas,
where gas leakage and products of combustion are rapidly
dispersed by wind and natural convection. Any enclosure
in which the appliance is used shall comply with one of the
following:
Any enclosure in which the appliance is used shall comply
with one of the following:
An enclosure with walls on all sides, but at least one
permanent opening at ground level and no overhead cover.
Within a partial enclosure that includes an overhead cover
and no more than two walls.
The barbecue may be within a partial enclosure that includes
an overhead cover and more than two walls, the following
shall apply:
• At least 25% of the total wall area is completely open; and
• At least 30% of the remaining wall area is open and
unrestricted.
In the case of balconies, at least 20% of the total of the side,
back and front wall areas shall be and remain open and
unrestricted.
Both ends open
Open side at
least 25% of
total wall area
Open side at
least 25% of
total wall area
30% or more
in total of the
remaining wall
area is open and
unrestricted
30% or more
in total of the
remaining wall
area is open and
unrestricted
Summary of Contents for 7000 Series
