Beech Ovens
Page 72
2/09/2019 (C)
E-Series Manual (R4)
Confidential and Proprietary
10.
Gas flame remains on low or high
fire.
10.1
Valve knob broken and spinning on the stem shaft
10.2
Faulty valve
10.1.1
Remove the knob, check valve stem shaft and replace
knob if broken.
10.2.1
Replace valve.
13.
Gas flame intermittent/erratic.
13.1
Gas supply problems. (For ULPG, is tank near empty)
13.2
Ventilation problem, flame being drawn under the oven floor.
13.3
Debris on top of pilot thermocouple.
13.4
Power supply interruptions.
13.5
Inspirator air adjustment incorrectly calibrated.
13.1.1
Check gas supply
(Contact service technician).
13.2.1
Check ventilation under front panel is free of obstruction
and clear under oven.
13.3.1
Clean debris away from the thermocouple.
13.4.1
Check power supply
(Contact electrician).
13.5.1
Refer to
Inspirator Calibration.
20.
Burner flame popping loud on start-
up
20.1
Pilot misaligned to flame
20.2
Build-up of
charcoal or debris on burner
20.1.1
Check the pilot alignment on the burner to ensure it
reaches the flame slots.
20.2.1
Inspect and clean burner
.
