23 of 30
WHEN LIFTING THE BED, DOUBLE CHECK TO MAKE SURE THE NOTCH AT
THE BOTTOM OF YOUR BED WILL ACCOMMODATE THE BASE MOLDING ON
YOUR WALL. IF YOU SKIPPED THIS STEP, PLEASE GO BACK TO PAGE 4 NOW.
THIS IS IMPORTANT BECAUSE THE MURPHY BED MUST SIT FLUSH AGAINST
THE WALL FOR PROPER INSTALLATION.
STEP 14:
With the bed fully assembled, and with two people, CAREFULLY lift the
“ENTIRE CABINET”
upright and push / slide it flush against the wall.
USE
“
AT
LEAST
”
TWO PEOPLE TO LIFT THE BED.
IF YOU HAVE LIGHTING, PLEASE BE SURE TO CONSIDER THE LOCATION OF
YOUR OUTLET AND HOW YOU WILL RUN THE WIRE TO THE OUTLET BEFORE
YOU PUSH THE BED AGAINST THE WALL.
NOTE: PLEASE BE CAREFUL ON WOOD FLOORS (OR BLANKETS) AS THE BED MAY
TRY TO SLIDE WHEN YOU LIFT IT UP. IT IS IMPORTANT THAT YOU HAVE AT
LEAST TWO PEOPLE WHEN LIFTING THE BED.
Summary of Contents for ECONOMY MELAMINE MURPHY BED
Page 30: ...30 of 30 APPENDIX A ...