16 of 30
while the second person snaps the larger end of the Piston (
A
) onto the ball receiver
of the Cabinet Vertical Plate (
B
) on the Cabinet Vertical.
You may need to move
the Assembled Face up and down slightly to perfectly align the ball receiver
and the head of the Piston
(
A
). REPEAT THIS STEP ON THE OTHER SIDE OF THE
ASSEMBLED FACE.
DO NOT USE A HAMMER TO SNAP ON THE PISTON
.
PLEASE PAY
ATTENTION TO
STEP 5
AND
STEP 6
. FORCING THE PISTON
ON (BY NOT READING THE INSTRUCTIONS) WILL RESULT IN
BREAKING THE HEAD OF THE PISTON. WARRANTY DOES NOT
COVER THE END OF THE PISTON. DOING THIS PROCESS
CORRECTLY WILL ALLOW YOU TO EASILY SNAP ON BOTH
ENDS OF THE PISTON.
Summary of Contents for ECONOMY MELAMINE MURPHY BED
Page 30: ...30 of 30 APPENDIX A ...