Loader arm
Type: WLA60
Version: 1
July 2019
Page 3 van 23
Preface
From now on, you can get your loader even wider deployed using the WLA60.
This hydraulic arm makes it possible to mount a Becx hedge cutter to your loader. The WLA60 is
designed to fit onto almost any loader. If your loader does not have the two required double-acting
hydraulic valves, Becx can offer you a control box-set as an option. The WLA60 is 60cm
extensible and offers a 105 degrees tilt. The arm can be used left or right and can be mounted to the
front or rear of your machine. Combined with the lift of your wheel loader this allows you cut nearly
every hedge. The WLA60 can carry our HS130HR and HS150HR hedge cutters, and even our new
HS131HR hedge cutter.
Carefully read this manual before using the loader arm. Always
follow the safety instructions set out in chapter 3.
One copy of this manual must be kept with the loader arm and must
be available to the user. All important servicing sessions and any
comments must be recorded and retained by the servicing company.
The user is responsible for selecting a suitable tool carrier for the
loader arm and its tools and for ensuring that the loader arm and
tool is properly attached and connected.