Becx Machines WLA60, User Manual

Page: 12 / 23

Loader arm
Type: WLA60
Version: 1
July 2019
Page 12 van 23
7
1 2
3
4
5 6
3.2. Mechanical components
Figure 3: General overview of the mechanical components
Figure 3 Part Explanation
1 Clamp

With this clamp, the tool, for example a Becx hedge cutter,
can be coupled to the arm
2 Side-shift

By side-shifting this part, the tool can moved to the left or
right.
3 Adapter plate

Using a minimum of 4 of the 12 fixing holes WLA60 can be
attached to almost any loader. It is preferred to us the holes
on the sides of the plate
4 Valve block

Optionally, the control valve can be supplied. This converts
to one single-acting hydraulic function to two double-acting
functions and a single-action function.
5 Cylinder to rotate

By using this cylinder the tool will be rotated up to 110
degrees. This can be used to switch between the cutting on
top, or on the side of the hedge.
6 Base

This section is the base of the arm. This connects all the
components together.
7 Side-shift cylinder

By using this cylinder, the tool can be side-shifted up to
60cm to the left or right