Becx Machines WLA60, User Manual, Page: 13 / 23

Loader arm
Type: WLA60
Version: 1
July 2019
Page 13 van 23
1
1 1
2
2
ATTENTION!

Depending on the loader, this arm can be delivered with two double-
acting electric functions. By default, the machine is delivered without
valve block, but with the necessary hydraulic fittings and hoses supplied.

See the supplied electrical and hydraulic diagrams for your model.

It is the responsibility of the user to link the machine in the right manner
to the tool and loader.
3.3. Wear- and grease parts loader arm
Figure 4: Overview wear- and grease parts loader arm
Figure 3 Part Explanation
1 Grease points

Squeeze grease into the grease nipples on the cutting heads.
See Chapter 1: Technical data or the grease specification
2 Wear strips

During use, these parts will wear out. When the strips are
worn onto the screw heads, these parts should be replaced
per set (4 strips)