Installation
9 /31 EN
Refrigerator / User Manual
3.3. Adjusting the feet
If the product stands unbalanced after
installation, adjust the feet on the front by
rotating them to the right or left.
3.4. Electrical connection
A
WARNING:
Do not make connections
via extension cables or multi-plugs.
B
WARNING:
Damaged power cable
must be replaced by the Authorized
Service Agent.
C
If two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.
•
Our company shall not be liable for any
damages that will arise when the product
is used without grounding and electrical
connection in accordance with the national
regulations.
•
Power cable plug must be within easy reach
after installation.
•
Do not use extension cords or cordless
multiple outlets between your product and
the wall outlet.
C
Warning for hot surfaces!
The side walls of your product are
equipped with coolant pipes to
improve the cooling system. The high
temperature fluid may flow through
these surfaces and may heat the
surfaces on the side walls. This is
normal and does not require service
maintenance. Be careful when touching
these areas.
