BECKWITH ELECTRIC M-2601, Instruction Book

Page: 63 / 70

1
3
A
B
C
7–12
M-2601/02/03 Instruction Book
Metering Setpoints Selection Table
Figure 7-13 Metering Selections
Command Buttons:
Clear Selections: Will uncheck all parameters
except voltage because one value, as a mini-
mum, should be displayed.
Set All Selections – Will check all available set-
point parameters for viewing.
OK – Sends the currently displayed information
to the controller.
Cancel – Returns user to the SLIMcom main
window. Any changes to the displayed informa-
tion are lost.
Erase Control Submenu
The Erase Control submenu allows the user to
erase all data for History or Tap Statistics. This
function erases not only the on-board flash in
the control, but all downloaded data files stored
on your hard drive. To erase current History and
Tap Statistics files from the computer only, use
the Erase Data command from the File menu.
Retrieve Data Menu
The Retrieve Data menu provides four com-
mands: History Data, Outage Data, Tap Sta-
tistics, Metering Data, and M-2501 Import.
■
NOTE: These are the only commands which
provide print control.
History Data
If a control is connected to your PC, then any
history data stored in the control is added to the
main history database. If no control is connect-
ed, then the main history database is loaded for
viewing. The database is capable of storing
months to years of data at 0 to 60 minutes inter-
vals. Selection of the History Data submenu dis-
plays a history plot of Voltage, VRQF and MWatts
waveforms (see Figure 7-3
).
Outage Data
The Outage Data command allows retrieval of
five Autodaptive Regulator Control outages, for
a period of 10 seconds each. The outages (see
Figure 7-5), are similar to the waveforms shown
in Figure 7-3.
Tap Statistics
Tap Statistics provides a continuously updated
graph of the taps being made by the control. See
Figure 7-4 for an example of the graphic format.
Metering Data
Metering Data provides a continuous update of
user-selected data quantities (refer to Metering
Setpoints Selection Table).
The Metering Data screen provides an
easy-to-print accounting of all metering data sam-
pled from the control.