BECKWITH ELECTRIC M-2601, Instruction Book

Page: 51 / 70

6–4
M-2601/02/03 Instruction Book
6.1 Post-Installation Test
1. Install control as described in Section
3.0, Installation.
2. Place the AUTO/MANUAL switch in
the MANUAL position.
3. Manually raise the tap until the RED
LOWER LED on the control lights.
4. Place the AUTO/MANUAL switch of
the test unit in the AUTO position.
5. Verify that the unit issues at least one
lower command in one minute or less.
Subsequent operations may require an
extended time period.
6. Place the AUTO/MANUAL switch in
the MANUAL position.
7. Manually lower the tap until the RED
RAISE LED on the control lights.
8. Place the AUTO/MANUAL switch in
the AUTO position.
9. Verify that the unit issues at least one
Raise command in one minute or less.
Subsequent operations may require an
extended time period.