background image

User Manual   |   EMS-8x / EMS-8x-TE   |   Beckmann GmbH

1 Equipment features

General features of EMS-8x series:

16 Bit processor controlled

electronic coin selector for five different types of coins + one free adjustable token

3-digit LED-display

programming via keyboard

programmable minimum insertion

programmable maximum time

additional coin insertion during operation possible

several electronic cash counters

two electronic hour meters (one erasable)

simple software update via optional SD-Card adapter

Special features of EMS-8x-TE:

door opener for washing machines or dryers

2 Safety precautions

The   coin   operated   timers   of   the   EMS-8x   series   are  built   by  the   state  of   technology   and   the
generally accepted safety-related rules. Nevertheless there may occur risks for the user or other
persons as well as impairments of the device or other values. Use the device only under faultless
conditions,   as   well   as   due,   safety-   and   risk-conscious   regarding   the   user   manual!   Especially
eliminate faults, that may impair safety, immediately! Keep the user manual always on site of the
device!   Pay   attention   -   additional   to   the   user   manual-   to   the   general   valid   legal   and   other
obligatory rules such as accident prevention and environmental protection! Do not make any
changes and / or modifications without the authorization of the manufacturer. Spare parts have to
correspond to the manufacturer-defined standards. This is only guaranteed, if original spare parts
are used. Maintain the required or within this manual stated deadlines for repeating maintenance
intervals! Provide a safe and non-polluting disposal of plastic or electrical replacement parts!

This coin operated timers are exclusive designed for managing different electric devices in rooms.
Any other or further use is not provided. The manufacturer is not liable for losses, that result from
misuse. A due use contains to heed the user guide and to observe the terms of service and
maintenance as well.

Page 4

Summary of Contents for EMS-8 Series





















Reviews: