Beckman Coulter StatSpin Express 2 M501-22 Instructions For Use Manual Download

Page: 29 / 36

Troubleshooting

No Power Light

Table 4.1

No Power Light

Is the instrument completely plugged into the

electrical outlet?

Plug power cord of the external power supply

into the electrical outlet.

Yes

Is the electrical outlet working correctly?

Try another electrical outlet.

Yes

Is the barrel connector from the power

adaptor completely plugged into the

centrifuge?

Plug the barrel connector of the external power

supply into the centrifuge.

Yes

Contact Beckman Coulter Customer Support.

Centrifuge Will Not Spin or Shuts Off

Table 4.2

Centrifuge Will Not Spin/Shuts Off Prematurely

Is the cover completely closed and cannot be

opened manually?

Completely close the cover.

Yes

Contact Beckman Coulter Customer Support.

Centrifuge Does not Open at the End of the Cycle

Table 4.3

Centrifuge Does not Open at the End of the Cycle

Cover Interlock By-pass

in Chapter 3 to open the cover and retrieve samples, then contact

Beckman Coulter Customer Support.

Service

Refer all service to qualified service personnel or Contact Beckman Coulter Customer
Support at 1-800-854-3633.

Be sure to complete and return the warranty card as directed.

Maintenance

Troubleshooting

55-003910-001FD

4-3

Summary of Contents for StatSpin Express 2 M501-22




































Search results

Summary of Contents for StatSpin Express 2 M501-22

Reviews:

Related manuals for StatSpin Express 2 M501-22

Brands by name

Popular brands

Beckman Coulter StatSpin Express 2 M501-22, Instructions For Use Manual

Search results

Summary of Contents for StatSpin Express 2 M501-22

Reviews:

Related manuals for StatSpin Express 2 M501-22

Brands by name

Popular brands