Beckman Coulter StatSpin Express 2 M501-22, Instructions For Use Manual

Page: 17 / 36

CHAPTER 1
Installation
Inspecting the Packaging
The StatSpin Express 2 and its accessories are delivered in one carton. If the centrifuge or
accessories have suffered any damage in transport, inform your carrier immediately.
Note
Save shipping carton and components to simplify return if service is required.
Confirming the Contents
The package contains:
• One Express 2 centrifuge (Model No. M501-22)
• One centrifuge rotor (Product No. RTX4A)
• Four rotor inserts for 13x75-mm tubes (Product No. SV01)
• One external power supply (Beckman Coulter Part No. B95657)
• One grounded power cord (for North American use only)
• One Instructions for Use
• One tool for removing rotor, 7/16" Nut Driver
• Warranty Card - Complete the warranty registration card as directed.
Installing the System
1
Place the StatSpin Express 2 on a level surface suitable for laboratory instrumentation.
Caution
During operation maintain a 30 cm (12 inch) clearance around the centrifuge. The
clearance must be free from obstruction and away from the edge of the surface
that the centrifuge is on.
2
Position the StatSpin Express 2 away from direct sunlight and sources of heat or cold.
For the acceptable range of operating temperature and humidity, refer to
Specifications .
3
Remove the foam packaging around the rotor and in the lid before operating the
centrifuge.
Connecting the Power
Plug the external power supply into a grounded outlet supplying the voltage and frequency
indicated on the power supply. When power is connected, the 30s LED illuminates, two
55-003910-001FD
1-1