Overview
PS1111-2403-0002
5
Version: 1.0
1
Overview
PS1111-2403-0002 | Power supply 24 V, 3.8 A, 1-phase
• 100-240V wide-range input
• Width only 36mm
• No PE connection required
• Efficiency of up to 93.8%
• Low no-load power losses
• Full power between -10°C and +60°C
• Push-in terminals
The PS1111-2403-0002 is a 1-phase 24 V power supply with an output current of 3.8 A and an output power
of 90 W.
On the input side, the device has a wide-range input and an input inrush current limitation.
The output operates according to the UI characteristic curve and switches to the safe hiccup mode in case of
overload/short-circuit.
The power supply is part of the PS1000 family and has a width of 36 mm. A DC OK LED monitors the status
of the output voltage. The power supply unit is designed in protection class II and does not require a
protective conductor on the primary side.
Overview of technical data
*)
Overview of technical data
PS1111-2403-0002
Output voltage
DC 24V
(Nominal factory setting 24.1V)
Adjustment range
24 - 28V
Output current
3.8 - 3.2A (below +60°C)
2.8 - 2.4A (at +70°C)
Linear load reduction b60°C and +70°C
Input voltage AC
AC 100-240V ±10%
Mains frequency
50-60Hz ±6%
Input current AC
1.45 / 0.95A at 120 / 230Vac
Power factor
0.58 / 0.45 at 120 / 230 Vac
Efficiency
92.1 / 93.8% at 120 / 230Vac
Temperature range
-10°C to +70°C
Dimensions (W x H x D)
36 x 90 x 91 mm
(without DIN rail)
Weight
270 g
Approvals/markings
CE
cULus
*) All values typical for 24V, 3.8A, 230Vac, 50Hz, +25°C ambient temperature and after a warm-up time of
five minutes, unless otherwise stated.
