Beckhoff EPP9022-0060, Manual

Page: 35 / 56

Commissioning and configuration
EPP9022-0060 35 Version: 1.3
5.4.1 LED filter
NOTE
Critical operating states may not be displayed under certain circumstances.
If you filter out messages with the LED filter, critical operating states may no longer be displayed by the
LEDs under certain circumstances.
• Only use the LED filter if you have good reasons to do so.
Use the LED filter if you do not wish certain messages to be displayed by the LEDs. The LED filter can filter
out two types of message:
• Messages that concern currents.
• Messages that concern voltages.
The LED filter can be set individually for each input channel:
Input channel CoE parameters for setting the LED filter
1 Control voltage U
S
8000:1A "LED filter" [
}
40]
2 Peripheral voltage U
P
8010:1A "LED filter" [ } 40]
The following options are available:
Value Enum Description
0 "Voltage and current" The LEDs signal all messages.
1 "Voltage only" The LEDs signal only messages that concern currents.
2 "Current only" The LEDs signal only messages that concern voltages.
255
dec
"LEDs off" All LEDs are off.