Beckhoff EP6224, Documentation

Page: 47 / 57

Commissioning and configuration
EP6224 and EP6228 47 Version: 1.5
Index 90n0 IO Info data Ch.1 - 4 (for 0 ≤ n ≤ 3)
Index (hex) Name Meaning Data type Flags Default
90n0:0 IO Info data Ch.1 - 4 Max. Subindex UINT8 RO 0x27 (39
dez
)
90n0:04 Device ID The device ID is used for validating the IO link device. UINT32 RO 0x00000000
(0
dez
)
90n0:05 VendorID The vendor ID is used for validating the manufacturer
of the IO link device. UINT32 RO 0x00000000
(0
dez
)
90n0:07 IO-Link revision ID of the specification version based on which the IO
link device communicates.
Bit 0-3: MinorRev
Bit 4-7: MajorRev
UINT8 RO 0x00 (0
dez
)
90n0:20 FrameCapability The Frame Capability indicates certain functionalities
of the IO link device (e.g. SPDU supported).
Bit 0: SPDU
Bit 1: Type1
Bit 7: PHY1
UINT8 RO 0x00 (0
90n0:21 Min cycle time The cycle time refers to the communication between
the IO link master and the IO link device.
This value is transferred in the IO link format for Min
Cycle Time.
Bit 6 und 7: Time Base
Bit 0 to 5: Multiplier
UINT8 RO 0x00 (0
dez
)
90n0:22 Offset time reserved UINT8 RO 0x00 (0
dez
)
90n0:23 Process data in length These parameters are transferred in the IO link format
for "Process data in length".
Bit 7:
BYTE
(indicates whether the value in LENGTH interpreted as
bit length [bit not set] or as byte 1 [bit set]
Bit 6:
SIO
(indicates whether the device supports the standard IO
mode [bit set])
Bit 0 bis 4:
LENGTH
(length of the process data)
UINT8 RO 0x00 (0
dez
)
90n0:24 Process data out
length These parameters are transferred in the IO link format
for "Process data out length".
Bit 7:
BYTE
(indicates whether the value in LENGTH interpreted as
bit length [bit not set] or as byte 1 [bit set]
Bit 6:
SIO
(indicates whether the device supports the standard IO
mode [bit set])
Bit 0 bis 4:
LENGTH
(length of the process data)
UINT8 RO 0x00 (0
dez
)
90n0:26 Reserved reserved UINT16 RO 0x0000 (0
dez
)
90n0:27 Reserved2 reserved UINT16 RO 0x0000 (0
dez
)