Mounting and wiring
EK1110, EK1110-0008
22
Version: 2.
4.2
Nut torque for connectors
For usage of the EtherCAT connector M8 of EK1110-0008 the following have to be noticed:
M8 connectors
It is recommended to pull the M8 connectors tight with a nut torque of
0.4 Nm
. When using the torque control
screwdriver
ZB8800
is also a max. torque of
0.5 Nm
permissible.
Fig. 15: EtherCAT Box with M8 connectors
4.3
Installation on mounting rails
WARNING
Risk of electric shock and damage of device!
Bring the bus terminal system into a safe, powered down state before starting installation,
disassembly or wiring of the Bus Terminals!
