Parameterization and commissioning
CX8095
43
Version: 1.5
Manual creation of the CCAT EIP adapter (slave)
The CX8085 is displayed with all necessary devices in the tree view. If you wish to carry out the insertion
and project planning of the CX8095 manually in TwinCAT, you can use this overview. If you carry out the
project planning of the CX8095 manually in TwinCAT, you must not forget to create the "CCAT EIP adapter
(slave)" in the System Manager.
Create the "CCAT EIP adapter (slave)" as follows:
1. Right-click on
I/O Devices
in the tree view on the left-hand side.
2. Click on
Append Device
in the context menu.
The Insert Device window appears.
3. Click on
CCAT EIP Adapter(Slave)
and then on
[Ok]
.
ð
The CCAT EIP adapter (slave) is created in the tree view. Please note that the adapter only needs to be
created as described if you manually append the CX8095 in TwinCAT2. All required devices are
automatically appended in TwinCAT when a scan is performed for the CX8095.
