Parameterization and commissioning
CX8095
41
Version: 1.5
6. By default there is no password. Click on
OK
.
7. If you do not wish to search for any further devices, click on
Close
to close the Add Route Dialog.
The new device is displayed in the Choose Target System window.
8. Mark the device that you wish to set as the target system and click on
OK
.
ð
You have successfully searched for a device in TwinCAT and inserted the device as the target system.
The new target system is displayed in the bottom right-hand corner together with the host name and IP
address (AMS Net ID).
Using this procedure you can search for all available devices and also switch between the target systems
at any time. Next, you can append the device to the tree view in TwinCAT.
