Disassembly and disposal
CX2550-0020
39
Version: 1.1
5. Pull the orange tab on the power supply unit and gently remove the device from the DIN rail.
ð
Next, you can remove the bar clips, in order to release the modules.
Removing the bar clips
In order to dismantle the assembly it must first be removed from the support rail. The bar clips can then be
removed with the aid of a screwdriver.
Remove the bar clips as follows:
1. Lift the bar clips with the aid of a screwdriver.
2. Once you have raised the bar clips, the bar clips can be removed.
ð
Once the bar clips have been removed successfully, the modules can be separated from each other.
Disposal
The device must be fully dismantled in order to dispose of it.
Electronic components must be disposed of according to national electronic waste regulations
Summary of Contents for CX2550-0020
Page 2: ......
