manualshive.com logo in svg

Beckhoff CX2550-0020, Manual

Share
Download
Beckhoff CX2550-0020 Manual Download Page 11

Unpacking and transport

CX2550-0020

11

Version: 1.1

3

Unpacking and transport

Note

Short circuit due to moisture

Moisture can lead to short circuits. Moisture can form during transport in cold weather or in
the event of large temperature fluctuations.

Avoid moisture formation (condensation) in the device, and leave the device to adjust to
room temperature slowly. If condensation has occurred, wait at least 12 hours before
switching on the device.

Proceed as follows to unpack the unit:

1. Remove packaging.

2. Do not discard the original packaging. Keep it for transporting the device in the future.

3. Check the delivery for completeness by comparing it with your order.

4. Please keep the associated paperwork. It contains important information for handling the unit.

5. Check the contents for visible shipping damage.

6. If you notice any shipping damage or inconsistencies between the contents and your order, you should

notify Beckhoff Service.

Shipping and relocation

Despite the robust design of the unit, the components are sensitive to strong vibrations and impacts.
Therefore, during transport please protect your device from:

• mechanical stress and

• use the original packaging.

Follow the specified storage conditions for the device and store it at temperatures between -40 °C and +85
°C.

Summary of Contents for CX2550-0020










































Reviews:

No comments

Brands by name

Popular brands

Load more brands