manualshive.com logo in svg

Beckhoff CX2550-0020, Manual

Share
Download
Beckhoff CX2550-0020 Manual Download Page 29

Commissioning

CX2550-0020

29

Version: 1.1

5.5.2

Using the Intel Manager for setting up the system

Note

Use identical storage media

In the RAID configuration errors may occur, with the result that functions and the software
interface are not displayed properly in the Intel Manager.

Use identical storage media, in order to ensure full functionality.

Note

Formatting storage media

Errors may occur during the RAID configuration.

First, format the additional storage media you wish to include in the RAID system.

With this method, the RAID system is set up with the Intel Manager. A key advantage of this method is that
the image does not have to be reloaded. The Intel Manager is already pre-installed on the device.

Prerequisites for this step:

• At least two storage media have to be installed in the device.

How to set up a RAID system with the Intel Manager:

1. Start the Intel Manager under 

Start > All Programs > Intel > Intel Rapid Storage Technology.

2. In the toolbar click on 

Create

.

Summary of Contents for CX2550-0020










































Reviews:

No comments

Brands by name

Popular brands

Load more brands