manualshive.com logo in svg

Beckhoff CX2550-0020, Manual

Share
Download
Beckhoff CX2550-0020 Manual Download Page 19

Commissioning

CX2550-0020

19

Version: 1.1

5.2

Installing storage media

Note

Loss of data

Working with storage media can lead to data loss.

Save your data and switch off the devices before you install or remove storage media.

Devices of the CX2000 Embedded PC series can be expanded with additional 2½-inch slots for storage
media using extension modules. The CX2550-0020 extension module can be used to install storage media,
such as HDD and SSD.

How to install storage media in the extension module:

1. Insert one side of the storage medium on the hard disk frame mounting pins. The storage medium has

matching mounting brackets.

Make sure that the label on the hard disk frame (HDD connector) and the contacts on the storage
medium face towards you. In this way the storage medium is installed the right way round in the hard
disk frame.

2. Tighten the hard disk frame with little force to the storage medium and insert the other side of the

storage medium on the mounting pins.

3. Push the storage medium attached to the hard disk frame into the 2½-inch slot of your extension

module, with the contacts side first.

Guide rails at the hard disk frame ensure that the hard disk frame with the storage medium faces the
right way.

Summary of Contents for CX2550-0020










































Reviews:

No comments

Brands by name

Popular brands

Load more brands