Beckhoff CP32 -2 -0020 Series, Manual

Page: 28 / 45

Decommissioning
CP32xx-2xxx-0020 28 Version: 1.1
5.2 Disassembly and disposal
In order to be able to dismount the Panel PC from the mounting arm, you must first have disconnected the
power supply and the cables (see Chapter 5.1
Disconnecting the power supply and cables [ } 27] .
Dismounting from the mounting arm
Depending on the selected mounting arm on which you mounted the device, the procedure for dismounting
is different.
To dismount the Panel PC from the C9900-M803, C9900-M804 and C9900-M9805 mounting arms, follow
the steps below as shown in Fig. 18:
1. Remove the lower screw of the mounting arm adapter with which it is screwed to the mounting arm
(Section A).
2. Swivel the device into an angled position so that the lower part of the mounting arm adapter is released
from the mounting arm (section B).
B
A
Fig. 18: CP32xx_dismounting from mounting arm, variant 1
3. Fully unhook the device from the mounting arm.
ð
You have now dismounted the Panel PC from the mounting arm.
If the Panel PC is installed on the C9900-M802 mounting arm or lower down on the C9900-M803, follow the
steps below for disassembly, as shown in Fig. 19:
1. Remove the two screws with which the mounting arm adapter is fastened to the mounting arm (section
A).
2. Pull the Panel PC together with the mounting arm adapter off the mounting arm.