Beckhoff BC8050, Documentation

Page: 57 / 93

Programming
BC8050 und BC8150 57 Version: 3.0.0
• BC8150 library (https://infosys.beckhoff.com/content/1033/bc8x50/Resources/
lbx/4059878411.lbx)
(old version)
• BC8150 library (https://infosys.beckhoff.com/content/1033/bc8x50/Resources/
lbx/4059880587.lbx)
(current version)
• example for BC8150 and KS8000 protocol (https://infosys.beckhoff.com/content/1033/bc8x50/
Resources/prx/4059882763.prx)
• example for BC8150 and ModbusRTU protocol (https://infosys.beckhoff.com/content/1033/
bc8x50/Resources/prx/4059884939.prx)
BC8150_Settings
Fig. 55: Function block BC8150_SETTINGS
FUNCTION_BLOCK BC8150_Settings
VAR_INPUT
bWriteSet :BOOL;
bReadSet :BOOL;
strBC8150_Set :Seriell_Set;
Key
bWriteSet : Rising edge starts the block and reads/writes the parameters. If these have changed, the new
parameters are written and the flag bReboot_Necessary is set. The Bus Coupler must then be restarted. The
user is notified if/when the bReboot_Necessary flag is set.
bReadSet : Positive edge reads the set RS232 parameters.
str BC8150_Set : Data structure for the RS232 interface.
VAR_OUTPUT
bBusy :BOOL;
bError :BOOL;
iErrorId :WORD;
strBC8150 :Seriell_Setting;
bReboot_Necessary :BOOL;
Key
bBusy : The block is active as long it is TRUE.
bError : Error bit.
iErrorId : Error number.
str BC8150 : Output of type, firmware, and RS232 parameters.
bReboot_Necessary : If this bit is TRUE after the bBusy is set to FALSE, then the BC8150 must be restarted
so that the RS232 settings are saved.