Beckhoff BC8050, Documentation

Page: 28 / 93

Parameterization and Commissioning
BC8050 und BC8150 28 Version: 3.0.0
4.4.2 Creating a TwinCAT configuration
In order to configure a Bus Terminal Controller of the BCxx50, BCxx20 or BXxx00 series, create a BX file in
the System Manager. To simplify matters, files for the basic units have already been prepared. Open the
corresponding Bus Terminal Controller with
New from Template .
Fig. 18: Creating a TwinCAT configuration
Select the corresponding Bus Terminal Controller.
Fig. 19: Selecting the Bus Terminal Controller
All Bus Terminal Controller components are now available:
• Fieldbus interface
• K-bus interface [
}
38]
• PLC Program
• SSB (only Bus Terminal Controllers of the BX series)
Please refer to the relevant chapter for device configuration.
4.4.3 Downloading a TwinCAT configuration
The TwinCAT configuration is loaded into the Bus Terminal Controller via ADS protocol.
Serial ADS protocol
(all Bus Terminal Controllers of the BXxx00 and BCxx50 series)
Enter the serial ADS connection, as described in the chapter Serial ADS [
}
34] .