Beckhoff AA3000 Operating Instructions Manual Download Page 22

Page: 22 / 67

Product overview

───

Version: 1.0

AA3000

3.5

Intended use

The electric cylinders from the AA3300 series may only be operated
for the purposes as defined in this documentation and under the
specified ambient conditions.

The components are installed in electrical plants or machines.
Stand-alone operation of the components is not permitted.

The thermal protection contact incorporated in the motor windings
must be analyzed and monitored on a regular basis.

Read the entire drive system documentation:

• This translation of the original instructions

• Original operating instructions for the AX5000 servo drive

• Original operating instructions for the AX8000 multi-axis servo

system

• Complete machine documentation provided by the machine

manufacturer

3.5.1

Improper use

Any type of use that exceeds the permissible values from the techni-
cal data is regarded as inappropriate and is thus prohibited.

Beckhoff electric cylinders from the AA3300 series are not suitable
for use in the following areas:

• ATEX zones without suitable housing

• Areas with aggressive environments, for example aggressive

gases or chemicals

The relevant standards and directives for EMC interference emis-
sions must be complied with in residential areas.

Summary of Contents for AA3000




































































Search results

Summary of Contents for AA3000

Reviews:

Related manuals for AA3000

Brands by name

Popular brands

Beckhoff AA3000, Operating Instructions Manual

Search results

Summary of Contents for AA3000

Reviews:

Related manuals for AA3000

Brands by name

Popular brands