17
GERNARAL OPERATION
>>>
> D
> GB
> F
> I
> E
> NL
Connecting to socket
Connecting up to power supply
Connection to the public mains grid is
achieved using the optionally-available
mains power supply unit. Please proceed
as follows to connect to the mains:
>
Hold the USB socket at the corrugated
grip area and push it into the connect-
ing socket on the Traffic Assist or into
the connecting socket on the carrier
plate as far as the stop, without using ex-
cessive force.
>
Use the plug to insert the mains section
in the socket.
TMC antenna
The TMC antenna included in the acces-
sories is used to receive traffic announce-
ments.
>
Push the connector of the TMC anten-
na into the socket provided on the back
of the carrier plate without using exces-
sive force.
GPS-antenna
Unit antenna
The GPS antenna is integrated into the
housing.
!
Danger of Death!
Make sure that your hands are not damp
and that the mains section is dry. Only
connect the mains section to a mains
supply with which such purposes are
permitted.
Note:
Remove the mains section if you are not
planning on using the Traffic Assist for a
long time.
Note:
The TMC antenna must be routed so
that your ability to drive the vehicle is not
impaired.
Note:
The integrated GPS antenna is not suita-
ble for use in vehicles with anti-glare win-
dows (metalised thermo-glass or metal
foil, indicated by the window label - SIG-
LA SOL, SIGLA CHROM, SIGLA,
KOOL-OF, SUNGATE, etc.) and vehi-
cles with fine-meshed heating wires in
the windows.
If this is the case, use an external GPS an-
tenna. Please consult your local specialist
dealer.
Summary of Contents for TRAFFIC ASSIST Z101
Page 1: ...Operating instructions...
