Operation
Becker Avionics
Contact Data
58
RCU6512
DV17551.03 Issue 03 June 2020
Display Contents Description
"FAILURE" is shown when:
•
RX SYNTH error is detected.
•
RX AGC error is detected.
•
TX SYNTH error is detected.
•
TX POWER error is detected.
•
INTERNAL error is detected.
Possible reasons:
•
HW or SW failure inside the transceiver.
Contact maintenance shop for assistance.
"FAILURE" is shown when:
•
POWER SUPP error is detected.
•
CHANNEL error is detected.
Possible reasons:
•
HW or SW failure inside the controller.
•
HW or SW failure inside the transceiver.
Contact maintenance shop for assistance.
3.11 Contact Data
In case of additional questions contact your local Becker Avionics dealer or forward your request direct
to Becker Avionics "Customer Service".
In the event of damage or a defect, the entire device must be returned for repair. The repair must be
done by trained Becker Avionics personnel.
For department and addresses, please see contact info page 2.
Any change by the user excludes any liability on our part (excluding the work described in this
manual).
FAILURE
FAILURE
