Becker Avionics
Installation
Installation Requirements
DV17551.03 Issue 03 June 2020
RCU6512
27
Rear Panel Installation
•
The RCU6512 is made for rear panel installation.
o
The four screws for installation are already attached at the front of the device.
For circular cut out and mounting holes see "Figure 5:
Drilling template (rear panel mounting)" page 27.
o
A minimum torque for fixing screws is 0.9 Nm (8 inch-lbs).
o
More information please see: "Dimensions - RCU6512" page 28.
Dimensions mm (inch)
61x61 mm (2.4x2.4 in)
Figure 4: Dimensions RCU6512 (front view)
Figure 5: Drilling template (rear panel mounting)
