Becker Highspeed II Operating Instructions Manual Download

Page: 71 / 86

Music operations

Repeat current track

The piece of music currently being play-
ed is repeated continuously when the
following key is pressed.

Press the key featuring the repeat icon.

Playback of the piece of music is repea-
ted continuously. The repeat icon ap-
pears in the track line on the right next to
the track.

If you want to stop the repeat function,
again press the key featuring the repeat
icon.

Setting volume

The control bar for volume is displayed
in the lower part of the MP3-Players by
pressing this key.

Press the key featuring the loudspea-
ker icon.

The control bar appears in the MP3-
Player.

A bar diagram displays the current volu-
me in relation to total volume. This rela-
tionship is also displayed numerically
above the diagram.
You can use the

keys to

change the volume in the direction indi-
cated by the arrow.

To reduce the volume, press the left-
hand arrow key.

To increase the volume, press the
right-hand arrow key.

The control bar disappears:

• when you press the

key.

• if you don't press any keys for three

seconds.

7009

7010

7014

8010+1

Warning!

Set the volume so that you can still hear
all ambient noise clearly.

Summary of Contents for Highspeed II























































































Search results

Summary of Contents for Highspeed II

Reviews:

Related manuals for Highspeed II

Brands by name

Popular brands

Becker Highspeed II, Operating Instructions Manual

Search results

Summary of Contents for Highspeed II

Reviews:

Related manuals for Highspeed II

Brands by name

Popular brands