9
SD memory card
A memory card is used as a storage me-
dium for road maps, music tracks and
images.
The card supplied with the unit can hold
one set of roadmaps. If you intend to lis-
ten to music using the Traffic Assist
Highspeed II or want to view images,
you must save these to a separate card
(not included).
When not in the unit, the memory card
must be stored in a protected dry place
away from direct sunlight in the pa-
ckaging supplied. Avoid touching or dir-
tying the contact strip.
You will find more details about the me-
mory card under:
• "Technical Data" on page 84
USB connection cable
The USB connection cable can be used
to connect the unit to a standard personal
computer by means of the USB port.
You can charge the Traffic Assist High-
speed II using the USB cable. However,
to use the data on the PC, you will first
have to install the free "Active Sync"
software from Microsoft
®
.
Unit bracket
The Traffic Assist Highspeed II can be
mounted in the vehicle using the unit
bracket.
Accessories
Mains power supply unit
This power supply allows connection of
the Traffic Assist Highspeed II to a
mains outlet.
Requirements for power supply:
Alternating current
• 100-240 V
0.2 Amps
• 50-60 Hertz
External GPS antenna
You can use an external antenna to im-
prove reception in vehicles where only
limited GPS reception is available (not
included in the scope of supply). Please
contact your local stockist for more in-
formation.
Note:
Playback of music while an active navi-
gation is in progress is only possible if
a memory card with a higher storage ca-
pacity is used (available separately).
This can be used to store additional map
material as well as music tracks.
Summary of Contents for Highspeed II
Page 1: ...Operating instructions GB ...
