Becker CentralControl CC31 Commissioning Instructions Download Page 4

Page: 4 / 40

Items included

•

B-Tronic CentralControl controller

•

USB WLAN stick

•

USB Flash memory stick

•

USB Centronic stick

•

USB B-Tronic/KNX stick (optional)

•

Mains adapter

•

Radio keypad

•

Commissioning instructions

Safety instructions

General information

•

Please keep the instructions safe!

•

Only use in dry rooms.

•

Keep people out of the system’s range of travel.

•

Keep children away from control units.

•

Observe all pertinent country-specific regulations.

•

Do not place any objects on the control unit.

•

Clean the control unit with a soft, dry, lint-free cloth, and do not use any chemical
cleaning agents.

Caution

•

If the system is controlled by one or more transmitters, the system’s

range of travel must always be visible during operation.

•

Keep packaging materials such as film away from children. Misuse

can create the risk of suffocation.

•

Switch the control unit off immediately if the mains adapter and the

plug to which it is connected is burnt or damaged. If a mains adapter

is damaged, replace it with an original one. A faulty mains adapter

must not under any circumstances be repaired.

•

Switch the control unit off immediately if the housing of the control

unit is damaged, or if liquids have penetrated.

Summary of Contents for CentralControl CC31









































Search results

Summary of Contents for CentralControl CC31

Reviews:

Related manuals for CentralControl CC31

Brands by name

Popular brands

Becker CentralControl CC31, Commissioning Instructions

Search results

Summary of Contents for CentralControl CC31

Reviews:

Related manuals for CentralControl CC31

Brands by name

Popular brands