Device Configuration
Access Management –
SNMP
73
BEC 6900 R21 / RidgeWave 6900 User Manual
SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging management
information between network devices. The
BEC 4G/LTE ODU
serves as a SNMP agent that allows a
manager station to manage and monitor the router through the network.
SNMP:
Activate to enable SNMP.
Get Community:
Type the Get Community, which is the password for the incoming Get-and-
GetNext requests from the management station.
Set Community:
Type the Set Community, which is the password for incoming Set requests from
the management station.
Trap Manager IP:
Enter the IP of the server receiving the trap message (when some exception
occurs) sent by this SNMP agent.
System Name / Location / Contact:
String descriptions of the SNMP agent.
Interface:
Select the access interface. Choices are
LAN
or
ALL
(Both LAN and WAN).
SNMPv3
SNMPv3:
Enable to activate the SNMPv3.
Username:
Enter the name allowed to access the SNMP agent.
Access Permissions:
Set the access permissions for the user; RO
--read only and RW--read and
writer.
Authentication Protocol:
Select the authentication protocol, MD5 and SHA. SNMP agent can
communicate with the manager station through authentication and encryption to secure the
message exchange. Set the authentication and encryption information here and below.
