Product Overview
Mounting Kit Installation – Using RT4R Kit
16
BEC 6900 R21 / RidgeWave 6900 User Manual
2. Wall or Pole Mount Installation
Mounting on Wall
Fix the T-formed Bracket to the wall by using
wood screws
and
Gyprock plugs
.
Mounting on a Pole between 1.5” to 2” (38.1~50.8mm)
Attach the T-formed Bracket and the W-bar to the pole then use
M6x60 bolts
,
M6 spring
washers
and
M6 washers
to fix the mounting kit onto the pole.
T-formed Bracket
Wood Screw
Wood / Gyprock Plug
1
2
3
M6x60 Screw Bolts
M6 Spring Washer
M6 Washer
W-bar
1
2
3
4
1
3
2
(a)
(a) The accept pole diameter is
from 1.5” to 2”. If the diameter is
larger than 2”, it can cause a
failure very fast. If diameter is
smaller than 1.5”, the clamping
force might be insufficient in
holding the device to the pole.
(b)
(b) To minimize bolts
crosstalk, the bolt should
gradually increase the bolt
load on both sides.
