Troubleshooting
97
BEC 6900 R21 / RidgeWave 6900 User Manual
Chapter 5: Troubleshooting
If your
BEC 4G/LTE ODU
is not functioning properly, you can refer to this chapter for simple
troubleshooting before contacting your service provider support. This can save you time and effort but
if symptoms persist, consult your service provider.
Problems with the Router
Problem
Suggested Action
None of the LEDs is on when you
turn on the router
Check the connection between the router and the
adapter. If the problem persists, most likely it is due
to the malfunction of your hardware. Please contact
your service provider or BEC for technical support.
You have forgotten your login
username or password
Try the default username "admin" and password
"admin". If this fails, you can
restore your router to
its factory settings by pressing the reset button on
the device rear side.
Problem with LAN Interface
Problem
Suggested Action
Cannot PING any PC on LAN
Check the Ethernet LEDs on the front panel.
The LED should be on for the port that has a PC
connected. If it does not light, check to see if the
cable between your router and the PC is properly
connected. Make sure you have first uninstalled
your firewall program before troubleshooting.
Verify that the IP address and the subnet mask are
consistent for both the router and the workstations.
