Device Configuration
Interface Setup –
LAN
53
BEC 6900 R21 / RidgeWave 6900 User Manual
(factory default).
IP Subnet Mask:
The default is 255.255.255.0. User can change it to other such as 255.255.255.128.
Alias IP Address:
This is for local networks virtual IP interface. Specify an IP address on this virtual
interface.
Alias IP Subnet Mask:
Specify a subnet mask on this virtual interface.
IGMP Snooping:
Select
Activated
to enable IGMP Snooping function, Without IGMP snooping,
multicast traffic is treated in the same manner as broadcast traffic - that is, it is forwarded to all ports.
With IGMP snooping, multicast traffic of a group is only forwarded to ports that have members of that
group.
Dynamic Route:
Select the RIP version from RIP1 or RIP2.
DHCPv4 Server
DHCP (Dynamic Host Configuration Protocol) allows individual clients to obtain TCP/IP configuration
at start-up from a server.
DHCPv4 Server:
If set to
Enabled
, your BEC 4G/LTE ODU can assign IP addresses, default gateway
and DNS servers to the DHCP client.
If set to
Disabled
, the DHCP server will be disabled.
If set to
Relay
, the BEC 4G/LTE ODU acts as a surrogate DHCP server and relays DHCP
requests and responses between the remote server and the clients. Enter the IP address of the
actual, remote DHCP server in the Remote DHCP Server field in this case.
When DHCP is used, the following items need to be set.
Start IP:
This field specifies the first of the contiguous addresses in the IP address pool.
IP Pool Count:
This field specifies the count of the IP address pool.
Lease Time:
The current lease time of client.
DNS Relay
Select
Automatically
obtained or
Manually
set. If select
Manually
, please enter DNS IP
addresses here.
Primary / Secondary DNS Server:
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the subnet mask.
Option 66:
Set the IP or hostname of the TFTP server for devices, like IPTV Set Box, to get
configuration settings from the TFTP server.
