BeBionic BeBionic 3 Technical Information Download Page 59 | Manualshive

Page: 59 / 68

background image

59

FCC Warning Statement

•

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:
1. This device may not cause harmful interference and
2. This device must accept any interference received, including

interference that may cause undesired operation.

•

This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. End users
must follow the specific operating instructions for satisfying
RF exposure compliance. This transmitter must not be co-
located or operating in conjunction with any other antenna or
transmitter.

•

Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.

•

The RSLSteeper bebionic Medium Hand, Model:
RSL-RP609, complies with Part 18 of the FCC Rules
(Section 18.212).

•

The antenna(s) used for this transmitter must be installed
to provide a separation distance of at least 20cm from all
persons.

•

The End product must have a label stating ‘Contains FCC
ID:PBBGC350616’ place on it inline with FCC labelling
regulations.

The FCC and IC information is located on the outside of the palm

of each hand (left and right) underneath the gaitor.

«
...
57
58
59
60
61
...
»

Summary of Contents for BeBionic 3





































































Reviews:

No comments

Related manuals for BeBionic 3

Brand: KaVo Pages: 13

Brand: vc999 Pages: 52

Brand: Malmet Pages: 14

Brand: Zempire Pages: 2

SATURA SPOT LED PRO

Brand: Elation Pages: 41

Brand: Tapco Pages: 16

Brand: Zenbooth Pages: 40

Visium CytAssist

Brand: 10x Genomics Pages: 51

Chromium X Series

Brand: 10x Genomics Pages: 5

Brand: Ultraflex Pages: 3

Brand: MAGIC FX Pages: 25

Brand: Velleman Pages: 16

Brand: Velleman Pages: 11

Brand: CAB Pages: 30

Brand: Masalta Pages: 13

Brand: Wacker Neuson Pages: 42

Brand: KERR Pages: 32

Brand: Sagitter Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands