Product Documentation
The following statements must be included in the end user documentation.
Regulatory Compliance Information
This equipment complies with Part 15 of the FCC Rules. Operation of this equipment is subject
to the following two conditions: (1) the equipment may not cause harmful interference, and (2)
the equipment must accept any interference that might cause undesired operation.
Radio and Television Interference
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy. If the equipment is not installed and used in
accordance with the instructions, the equipment might cause harmful interference to radio
communications. There is no guarantee, however, that such interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception (which can be determined by turning the equipment off and on), the user is
encouraged to try to correct the interference by taking one or more of the following measures:
•
Relocate the equipment
•
Increase the separation between the equipment and the receiver
•
Connect the equipment into an outlet on a circuit different from that of other electronics
•
Consult the dealer or an experienced radio technician for help.
Important:
Any changes or modifications not expressly approved by Fullpower Technologies,
Inc.(FTI) could void the EMC compliance and negate your authority to operate this
equipment.
This equipment was tested for FCC compliance under conditions that included the use of FTI
peripheral devices and FTI cables and connectors between system components. It is important
that you use FTI cables and connectors between system components to reduce the possibility
of causing interference to radios, television sets, and other electronic devices. You can obtain
proper FTI cables and connectors through an FTI-authorized dealer.
Responsible party (contact for FCC matters only)
Fullpower Technologies, Inc.(FTI)
1200 Pacific Ave, Ste 300 Santa Cruz, CA 95060 USA
FCC ID: 2AF2O-STS-10
Contains FCC ID: H8N-WLL6540
Industry Canada Statement of Compliance
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2) this
d
evice must accept any interference, including interference that may cause undesired operation
of the device.