•
I
t may be necessary to adjust the vertical arm locking plate because the tool does not lock or it
does not rise from the rim (2mm space necessary), adjust nuts as shown in Fig. 17.
To clean or replace the silencer for opening/closing clamps, see Fig 18 and proceed as follows:
1. Remove the left side panel of the machine body by unscrewing the four fixing screws.
2. Unscrew the silencer installed on the pedal system, (behind the clamp opening/closing pedal).
3.
C
lean with compressed air or, if damaged, replace by referring to the spare parts
catalogue.
For cleaning or replacing the silencer of bead breaker, see Fig. 19 and proceed as shown on previous
point 1 and 3.
