24 / 32
REV. 01
Always be alert to abnormal noises during rotation o the turntable .
•
Move the tire so that the bead passes below the front section of the mounting head and is
brought up against the edge of the rear section of the mounting head itself.
•
Keeping the tire bead pressed down into the wheel rim channel with your hands, press down on
the pedal (Z) to rotate the turntable clockwise. Continue until you have covered the entire
circumference of the wheel rim (Fig. 12).
To prevent accidents, keep hands and other parts of the body as far as possible
from the tool arm when the tabletop is turning.
•
Insert the inner tube if there is one and repeat the same operations to mount the upper side of
the tire.
Demounting a n d mounting are always done with the turntable
rotating clockwise. Counter-clockwise rotation is used only to correct
operator’s errors or ifthe turntable stalls.
