Page 25 of 30
SRM9000 2 Way Radio Programming
•
Programming of the radio operating frequencies and personalities of the SRM9000 two
way radio module should only be undertaken by a qualified Radio Service Technician.
Programming requires use of Simoco SRM9000 FPP alignment software and
programming cable together with appropriate RF test measurement equipment. Only
someone totally familiar with the users specific radio configuration requirements should
undertake this task.
Specification Summary
Electrical
Input Power
10-32VDC 5A
Power Consumption (Average Power)
Standby Mode
8W (Iridium = 5W, + RADIO = 3W)
Talk/Transmit Mode
Receive 17W (Iridium = 7W, + RADIO Receive = 10W)
Transmit 21W (Iridium = 7W, + RADIO Transmit = 14W)
Battery
Capacity
(@ 20°C)
Super Li-Ion 19AH @ 11.1V
Standby Capacity
~24 Hours
Talk/Transmit Mode Capacity
~10 Hours
Charge Time
~12 Hours
Operational Temperature
-10°C to +60°C (charging : 0°C to +40°C)
Intelligent Satellite Handset
Voltage
+12VDC
Audio
Line level
Digital Control
115kbps RS232
RF Interface (L-Band Transceiver)
Frequency range
1616MHz to 1626.5MHz
Average Power
7W during a transmit slot (max)
Average Power
0.6 W during a frame (typical)
Receiver Sensitivity
-118.5 dBm at 50W (typical)
Receiver Spurious Rejection at offsets
> 1 MHz (typical)
60 dB
Duplexing method
TDD (Time Domain Duplex)
Oscillator stability
±1.5ppm
Input/output impedance
50 Ohms – TNC F Connector
Multiplexing method:
TDMA/FDMA
Summary of Contents for RST825 SatRADIO
Page 29: ......
Page 30: ...Page 30 of 30 ...
