Page 17 of 30
Setting up Autodial feature
The Auto-dial switch indicates to the SatRADIO that a number is to be auto-(re)dialed once
the Radio is turned on.
There are two means of setting an Autodial number into the system
1/ Last number dialed
2/ Quick Dial location “0” ( zero)
Last number dialed
The last number dialed is simply the last number dialed on the SatRADIO either via the
Iridium handset or the DTMF radio. This provides the most convenient means of having an
easily changeable number, however caution must be exercised as the Autodial switch will
automatically dial as soon as activated.
To check the last number dialed simply take the handset from the cradle and press the OK
button this will display the last number dialed. To enter a new number simply enter the
number in the full dialing sequence and then press OK
Now as soon as the Autodial switch is activated this is the number that will be continually
attempted to be called. If at any time the call drops out the system will automatically redial in
order to re-establish the call within 20 – 30 seconds.
This will not override a preconfigured Autodial as hard programmed into the terminal, the
Quick Dial “0” location will take priority. Ensure the Quick dial
IS NOT
configured to ON in the
terminal if you wish to use the last number dialed option.
Quick Dial - Autodial
The Quick Dial Autodial feature uses the Quick Dial memory location “0” of the satellite
terminal. This enables a fixed number to be programmed for permanent application where
the SatRADIO is always to call the same location. This is PIN protected using the Beam
Management System and can only be changed by an authorized person.
So long as the main terminal has been set up for Quick Dial with a number programmed into
location “0”, then as soon as Autodial is switched ON the system will automatically and
continually maintain a call with the preset number.
Hanging Up
To deactivate the Autodial simply switch the Autodial button to OFF or alternatively switch
the Satellite Terminal to OFF.
NOTE:
Transmission of any DTMF tones will only transmit whilst
the transmit button of the two-way is depressed and there is no
other activity on the Radio channel
Summary of Contents for RST825 SatRADIO
Page 29: ......
Page 30: ...Page 30 of 30 ...
