RST100
USER
&
INSTALLATION
MANUAL
5
Safety Information
Note:
Read the following information before installing and using the BEAM
RST100.
Your RST100 is a low power radio transmitter and receiver. When it is ON, it receives
and sends out radio frequency (RF) signals.
The design of your RST100 system complies with international safety standards.
Refer to the appropriate section of the
RST100 User Manual
for additional relevant
safety information.
Warning:
Do not open equipment. There are no user-serviceable parts inside.
If a DC power supply is to be used, its output must comply with the
Safety Extra Low Voltage (SELV) requirements of IEC60950.
All connectors except the Line and Accessory sockets must only be
connected to equipment ports which comply with the Safety Extra Low
Voltage (SELV) requirements of IEC60950.”
