RST100
USER
&
INSTALLATION
MANUAL
31
Remote Configuration
The Supervisor Menu items are available for remote configuration via a combination
of the Iridium Short Burst Data and or SMS services. Refer to your Service Provider
on how to register for this service.
To configure your RST remotely you will need to know its Phone Number, Supervisor
PIN and the International Mobile Equipment Identifier (IMEI ) number.
Multiple configuration commands may be sent in one SMS. The Supervisor PIN is
only required once at the start. Once the PIN has been entered the top of hierarchy
for each subsequent command in the message is the Supervisor menu.
The menu text is suppressed from the reply, but otherwise you enter digits in your
command exactly as you would enter them if you were on a directly connected
terminal.
The replies to all your commands come back in one SBD email attachment. The
original entered command is echoed back so you can see what each reply is for.
For example, to set the Ringer Frequency remotely to 20Hz, send an SMS to the
phone number containing RST RMT 3170 4120
