RST100
USER
&
INSTALLATION
MANUAL
11
The RST100 Status Indicators
The status indicators are located on the front panel of the RST100. The LED lights on
the front panel show the RST100 status.
Note:
The LED lights will blink in different combinations to
indicate transmission such things as transmission status, signal
strength and power.
Display Status Indicators
Power
When the RST100 powers up, the Power indicator flashes while it carries out internal
self-diagnosis, and then goes steady green and remains lit while power is applied to
the RST100.
If the Power indicator does not illuminate at all when you switch on the RST100,
check the power supply to the RST100.
If the Power indicator flashes rather than illuminates continuously after a few
seconds, the RST100 may require service. Contact your service provider.
Voicemail Waiting
The Voicemail Waiting LED flashes to indicate new message(s) are waiting in your
voice mailbox (subject to network support, not available from all providers).
SMS Waiting
The SMS Waiting LED flashes to indicate an SMS message is waiting.
Call Status
The Call Status indicator indicates the status of the call. The Call status indicates:
•
In
Call
•
Waiting to connect
•
Incoming
call
