RST100
USER
&
INSTALLATION
MANUAL
28
Configuring the RJ11 port parameters
The ability to configure the RJ11 port parameters is one of the major features of the
Beam RST100.
The parameters of the port are configured using the Beam Management System
“BMS”.
The BMS allows the configuration of:
•
Dialled number processing (to support crew calling and specialized
applications)
•
Line settings such as dial tone frequency and sound (in order to make the
RST100 sound like any other phone in the network)
•
Gain settings (to allow optimization for short and long copper tails up to 500m)
•
Impedance (to accommodate a large range of terminals equipment including
PBXs)
This ability to adapt the RST100 to particular applications opens up new areas of use
in crew calling, rural community centers, SOHO use and Universal Service Obligation
activities.
The RST100 is designed to support multiple phones in parallel, and can operate with
many common calling card platforms allowing the creation of specific solutions to
address specific needs.
The configuration of the RJ11 interface is covered in the RST 100 Configuration
Manual, a companion to this document.
